Posts Tagged ‘equipment rental’

At first glance, what do you see?  A double-wide canopy spanning the entire sidewalk?

If you did – you would be correct but there is more to it than meets the eye.  You don’t think we would just toss up a double wide sidewalk shed using our famous 767-00 “Philly” frames would you?  Of course not.  What you have to remember is that this a large span we have to cover so the facade resoration can go on overhead.  And there are certain regulations that are mandated by our state as to the amount of weight this canonpy must support.  In Philadelphia it’s 300lb psf.

My first thought was; why didn’t they use a system scaffold to bridge the gap?  I understand that there would have to be two foot towers to support the beams and that would be a bit of cluster (you know what).  But I’m no engineer.  So then I thought, why don’t I just ask Superior Scaffold top engineer, Mike Leone?  After all, he’s the man who has to design all these scaffold projects to meet code.  I’ll let him tell you in his own inimitable way.

“You can make system scaffold work in a situation like this, but you would have to configure it properly and have enough posts/verticals and watch your leg spacing to get 300 psf rating.  It would be a lot more pieces than using the canopy frames and would take longer to erect.  So this is faster and less expensive and you get the same rating,” said Mike. “The City of Philadelphia’s Department of Streets Code requires a minimum interior opening of 6 feet. The Philly frame, as the name implies, was made specifically to comply with these codes.”

So there you have it.  Not only is up to code but can also be faster to erect.  I noticed another feature of this type of set up as well.  It could help with the pedestrian traffic flow.  It creates an isle-like walkway where traffic can flow easily in both directions just like on a highway.

And I just love to see the photos of how they erect these projects.  Take a look.

They also painted the wood panels to help match the decor of the building.  That’s another little added touch that Superior offers.  Very cool.

We at Superior are always spanning the globe for unique scaffolding solutions to bring you.

That reminds me… Cue the music.  “Spanning the globe to bring you the constant variety of scaffold… the thrill of erection… and the agony of having to take it down… This is Philly’s Wide World of Scaffold!  Sorry, it just brought me back there for a minute.

If you have a large sidewalk or area that needs overhead protection (canopy, sidewalk shed) call Superior Scaffold at (215) 743-2200 or hit the website at www.superiorscaffold.com today.

#scaffold#scaffolding#rental#rent#superiorscaffold#restoration#inspection#contstruction#facade
#masonry#canopy#protection#howto#erection#install#emergencyservices#masonry
#suspendedscaffold#mastclimber#canopy#philly#philadelphia#pa

Here’s the deal.  Nobody likes to hear the word emergency.  Not even us at Superior Scaffold.  But the truth of the matter is that life does happen and we can help.

Sometimes things just wear out or a truck backs into something or water leaks in.  But when it happens to your building, property or project we are there.  We are one of the few scaffolding companies that have an emergency services line set up just for this type of event.   (215) 743-2200.  And in most times we can be onsite within hours assessing the situation and implimenting a plan to getting you and your project, building or site up and running safely.

Our website is populated with examples of where Superior Scaffold jumped in at a moments notice to provide scaffold support in emergencies.

I just grabbed this one at 16th & Walnut where a piece of the building’s facade actually came loose and fell off.  Luckily, no one was around when it happened.

But Superior was called in and was able to quickly provide a solution in a canopy and overhead protection for pedestrians.   A facade rebuild was required when inspectors found the entire exterior was damaged.  A much larger system scaffold was erected to address that facade and remodel. Containment wrap was also used to help keep debris locked in and out of the way.

I just love seeing the during and after shots of the project!   You kind of get an idea of what the guys on the crew have to go through the erect one of these.

If you should find yourself in need of emergency scaffold services call our hotline at (215)743-2200 and follow the prompts.  If it’s after hours don’t despair, just follow the prompts and one of our estimators will call you back.

#scaffold#scaffolding#rental#rent#superiorscaffold#restoration#inspection#contstruction#facade#masonry#canopy#protection
#howto#erection#install#emergencyservices#masonry#suspendedscaffold#mastclimber#canopy#philly#philadelphia#pa

It’s not every day that you get to see just how we erect a sidewalk shed (canopy).  We usually concentrate on the finished product and how well the client liked our work.  But today is another story.  You get to see just what it looks like before, during and after we install overhead protection on a job site.  We are going to look at the work done in the middle of one of Center City’s busiest intersections at 11th and Market – the Aramark Tower.

Crews usually start at night to avoid the massive traffic that will ensue during the daytime.  In this first shot they have started building the base framework which consists of the 2 inner and outer main posts (or tubes), the bracing frame (s), the jack (s) and the intermediate plate (s).

Here we see crews are just starting to put the steel beams on top of the aluminum posts.  These will be placed all the way down the run and act as support for the aluminum joists to follow.  Rolling towers are used to get crews up high enough to place the beams.

You can see here how the Superior Scaffold trucks deliver the equipment to the job.  Again, in the evening or early in the morning to avoid traffic.

This shot shows the main framework as well as the steel beams that will support most of the weight overhead.

Crews have carefully designed the layout so that doors and staircases are still accessible to pedestrians.

The aluminum joists are then laid over the steel beams for added support.   These will handle the weight of the planks and/or corrugated steel panels that will lay over top.

You can see how the pieces intertwine to create a super stable base for anything going up on top of it.

You can see how the height of the rolling tower is adjustible to reach diffrerent eleveations.

And then finally, in this case, the Microlam wood planks are added to the top of the sidewalk shed.  In downtown Philly, canopies have to have a 300 lb/sq foot rating so you can put suspended scaffolds on top or even additional scaffold, if needed.

And the last part of this very long process is adding the 4X8′ debris panels that can be painted to match the client’s decor (which these will be) or left a beautiful Superior Scaffold red.

As a finishing touch, temporary lights will also be strung beneath to illuminate the walkway at night.

And in a very simplified form, that’s how a canopy, sidewalk shed, overhead protection is assembled.  There are many different types of sidewalk bridges too – some made from scaffold frames, some from bridge columns and some from aluminum posts.  You can go here and see the different options we have available at Superior Scaffold.  Call (215) 743-2200 today if you need one of these beauties for your project.

The Philadelphia Auto Show runs from February 8 – 16, 2014 at the The Pennsylvania Convention Center, 1101 Arch Street, Philadelphia PA 19107

Toyota set up an indoor track complete with traction ramps, water hazards, sand traps and suspension bumps giving the user the ultimate car buying experience.  Patrons are invited to ride along inside the new line up of Toyota vehicles to get a real world idea of how they will perform.

Toyota contacted Superior Scaffold to build the ramp that would test the climbing and traction control of their vehicles.  We jumped at the chance.  The ramp is 8’ high by 14’ wide and 53’ long.  (see pic)

The challenge here was that the ramp not only had to support the weight of the cars driving up and over it but also the 100 tons of dirt that would be put on top of it.

Superior engineers put pen to paper and calculated weight ratios and all of their super mathematical formulas and came up with a superior design (which was stamped and authorized).

Work set out using beams, system scaffold, and shoring materials to construct the ramp.

Details: 14’ aluminum beams on 2’ centers were used at the ramps, 14’ steel beams at 2’ centers were used at the top (flat) section.  3’ and 4’ spans were used going side to side, and 2’ spans going ramp to ramp.  They also used U-Heads on the flat sections and swivel U-Jacks on the ramps.  Then they crossed everything with 18’ aluminum beams on the ramps at 1’ centers and 12’ aluminum beams at 1’ centers on the top section.  And then the entire thing was skinned with 3/4’” plywood.

It’s a wild looking design that ultimately holds ton’s of weight. It’s so sturdy in fact that Superior Estimator, Pat McAndrew, and foreman, Kenny Foreman were putting finishing touches on beneath the ramp and Pat said, “We were under there for at least 20 minutes and unbeknownst to us – cars had been driving over it the entire time.  We never felt a thing.  It’s that sturdy.”

We were glad to help Toyota show off their new line up of vehicles.  Now, if we can get a test ride around the track a few times we will be happy.

Call Superior Scaffold at (215) 743-2200 for all of your scaffold needs.

Visit www.superiorscaffold.com today.

#autoshow#phillyautoshow#philadelphiaautoshow#toyota#pa#scaffolding#scaffold#scaffoldrental#masonry
#buildingmaterials#construction#equipmentrental#rent#rents#ladders#offroad#track#show#auto#superiorscaffold

This is amazing to me.  How do you add 3 floors to an already existing building?  You probably haven’t thought about that before.  I know that I hadn’t but the people at Superior Scaffold have many times.  In downtown areas space is a valuable commodity so sometimes the only place to expand is up.

But this leaves a myriad of challenges.  The biggest one being how do we do all of the necessary heavy work outside of the building that needs to be done?  Well, by creating working space outside of the area being built.

And in this case at the Parc Rittenhouse – there needed to be enough room and support to handle all of the weight for construction materials and the guys laying the bricks, facade and masonry work on the new addition.

Check out how Superior Scaffold engineers solved the problem.  It wasn’t from scaffolding from the ground up (impossible on this job – the lower roof wouldn’t support it) but from beneath the floors that were being added onto.  They used a high exposure cantilever scaffold system with giant weight supporting aluminum beams.  Check out the photos!

These huge beams are levered inside the floors below and stick out the windows.  They are then counter-balanced with another set of aluminum beams up against the ceiling joists to hold the weight outside of the building.  The ceiling beams are shored up and the system is balanced.

It’s a crazy system but makes total sense.  Let the existing building take the weight and leverage to support anything outside on the beams.  See the photos.

In some cases, like on the corners, crews had to actually cut holes into the brick to stick out the aluminum beams.  And then, they would deck them and add scaffolding.

Then, the crews deck it and put any scaffolding onto it to get up the next level.  I don’t know the weight ratio of what it can hold (I’ll have to ask the engineers and get back to you) but it’s a tremendous amount.

Superior  then erected a 45′ high systems scaffold to allow worker access to each of the floors as they were constructed.  They also added several man material hoists to get building materials and equipment up to the top.  There are suspended scaffolds on the job too helping install the new balconies.

Superior also had to install overhead protection all of the way around the building. This was quite an extensive job.

The building exterior also underwent a makeover bringing it back to its former glory of almost ¾ a century ago.

Here are a few (never before seen) shots of what the additional floors and subsequent penthouses looked like in their finishing stage.  If you look carefully, you can still see some of the cantilever beams sticking out through the brick.

All in all, this is a very cool way to add additional floors to an already existing structure.  Superior scaffold has done this many times and are experts at it – so don’t try this at home.  Give them a call at (215) 743-2200 or visit them at www.superiorscaffold.com today.

So say it with me, 3 times really fast.

High exposure cantilever scaffold system

High exposure cantilever scaffold system

High exposure cantilever scaffold system

The Parc Rittenhouse is at 225 South 18th Street, Philadelphia, PA